A standard chimney sweep paired with a Level 1 inspection typically runs $250–$400 for one easily accessible flue in reasonable condition. That price covers a visual inspection, soot and creosote removal, and a written report. Add $75–$150 for steep or multi-story roof access, $50–$100 per extra flue, $100–$300 for heavy creosote buildup, and $150–$300 if the customer needs a Level 2 video scan.
Chimney sweeping is one of those jobs where the sweep itself is cheap labor and the real money is in knowing what to charge for everything around it — roof conditions, flue count, and what the camera finds once you're up there. If you're pricing it like a flat $150 service call every time, you're leaving money on the table on half your jobs and scaring off customers on the other half.
What a standard sweep and inspection actually includes
A basic job covers three things: a visual inspection of the firebox, smoke chamber, and flue; mechanical brushing to remove soot and light-to-moderate creosote; and a written report noting the chimney's condition. Most sweeps also check the damper, cap, crown, and mortar joints from what's visible without tools or a camera.
This base-level job assumes normal access — a single-story or easily reachable roof, one flue, and creosote that brushes out without chemical treatment. That's the scenario your $250–$400 base price should cover. Everything outside that is an add-on, not a built-in cost you absorb to keep the quote simple.
The three inspection levels, briefly
The Chimney Safety Institute of America and NFPA 211 define three inspection levels, and knowing which one you're quoting keeps your pricing and your liability straight.
- Level 1 — a visual inspection of accessible portions of the chimney, no tools or camera required. This is what most annual sweep-and-check appointments are.
- Level 2 — adds a video scan of the full flue interior, plus inspection of attics, basements, and crawl spaces the flue passes through. Required after a chimney fire, before a home sale, or when the homeowner is adding an insert or changing fuel type.
- Level 3 — involves removing components (masonry, drywall) to access concealed areas, usually triggered by something serious found in a Level 2 inspection, like a suspected hidden hazard.
Most residential jobs you quote will be Level 1. Quote Level 2 explicitly as its own line item when a customer asks for it or when circumstances call for it — don't fold a video scan into your base price, because it changes your time on site and your liability if you miss something a camera would have caught.
What pushes the price up
These are the variables that separate a $280 job from a $600 job, and they're the ones worth asking about before you quote over the phone:
- Roof access and pitch — steep roofs, second- and third-story chimneys, or chimneys without safe ladder access add setup time and risk. Add $75–$150.
- Additional flues — a house with a fireplace flue and a separate furnace or water heater flue needs both swept and inspected. Add $50–$100 per extra flue.
- Heavy creosote or glazing — stage 2 or 3 creosote that's glazed on rather than loose soot often requires chemical treatment (a creosote remover applied and left to work before a return visit) or extended labor. Add $100–$300.
- Caps, crowns, and dampers — if the inspection turns up a damaged cap, cracked crown, or stuck damper, that's a separate repair quote, not something to fix for free while you're up there.
- Liner condition — if the Level 1 inspection raises questions about the liner (cracks, gaps, missing sections), recommending a Level 2 scan and pricing the liner work as its own estimate protects you if a customer later claims you should have caught it.
- Second visit for drying time — heavy glazing sometimes needs a chemical treatment applied, then a return trip days later to finish the mechanical clean. Price that as two visits, not one long one.
None of these are exotic. On a given week you'll run into at least two or three of them, and if your price book only has one line item for "chimney cleaning," you're guessing every time instead of quoting.
How to quote it without underpricing or overcomplicating it
The fix is the same one that works for any service trade: build a base price for the standard job, then a short list of named add-ons with their own prices, and apply them consistently. A customer who hears "$300 base, plus $100 if you've got a second flue for the furnace" trusts the number more than one who hears a vague range that depends on what you find once you're on the roof.
This matters even more for chimney work than most trades because so much of the price depends on things you can't see from the ground — glazing thickness, liner gaps, a crown that looks fine from the yard but is cracked up close. Asking the right questions before the visit (how old is the chimney, when was it last swept, has it had a chimney fire, is there a wood insert) gets you closer to the right number before you've climbed anything.
Keep your pricing consistent across every job
If you run chimney sweeping alongside other seasonal trade work, the same discipline applies everywhere: a base price for the standard scope, clear add-ons for the stuff that varies, and a written estimate the customer approves before you start. Trusso's price book feature lets you set that base price and every add-on once — roof access, extra flues, creosote severity, liner work — so every estimate you send pulls from the same numbers instead of being reinvented on the spot. If you're still building that list from scratch, this guide to building a contractor price book walks through how to structure it so it actually gets used.
Trusso runs on a flat $29–$99/month pricing structure with no per-user fees and a 14-day free trial, so a solo chimney sweep or a two-truck crew can get a price book, scheduling, and invoicing running without the software cost scaling against them every time they add a helper.
What's a fair price for a basic chimney sweep without an inspection?
Sweep-only (no written inspection report) typically runs $150–$250 for a single accessible flue. Most customers ask for the sweep-and-inspection combo instead, since the inspection adds relatively little cost but gives them documentation for insurance or resale.
Should I charge extra for a Level 2 video scan inspection?
Yes. A Level 2 scan takes meaningfully more time and equipment than a Level 1 visual check and is often required for home sales, insert installs, or after a chimney fire. Price it as a distinct line item, usually $150–$300 on top of the base sweep.
How much should I charge for heavy creosote buildup?
Stage 2 or 3 glazed creosote that won't brush out with standard rotary tools usually needs a chemical treatment and sometimes a second visit. Add $100–$300 depending on severity, and be upfront that it may require a return trip.
Do I need to quote cap or crown repairs separately from the cleaning?
Always. A sweep-and-inspection quote should cover the cleaning and the assessment only. If the inspection finds a damaged cap, cracked crown, or liner issue, present that as a separate estimate for the customer to approve before you do the repair.
How do I avoid underquoting multi-flue houses?
Ask how many fireplaces or fuel-burning appliances (furnace, water heater) vent through separate flues before you set a price. A house with two flues roughly doubles your time on site, so price each additional flue as its own add-on rather than bundling it into one flat number.
Run your business the simple way
Try Trusso free for 14 days and send your first estimate in minutes.
Start 14-Day Free TrialKeep reading
What Is Construction Takeoff Software and Do Small Contractors Need It?
Takeoff software measures quantities—areas, lengths, counts—straight from plans so you can price a job without a tape measure and a calculator. Here's when a small contractor actually needs it.
Read articleComparisons7 Best Contractor Foreman Alternatives for General Contractors
Contractor Foreman covers a lot of ground but little of it goes deep. Here are 7 alternatives GCs switch to once they need real takeoff, sub bid-outs, or sharper scheduling.
Read article