Estimate drywall repair by pricing each patch individually based on its size, then adding separate line items for texture matching, priming, and painting. Charge a flat minimum per visit (typically $150–$300) regardless of hole size, since a nail-pop patch takes almost the same setup, drive time, and dry-time coordination as a 2-foot hole. Add extra for ceilings, popcorn texture, and multi-coat jobs needing return visits.
Drywall repair looks simple from the outside — patch the hole, blend the texture, paint it, done. But it's one of the easiest jobs to underprice because the labor isn't really about the hole. It's about matching what's already on the wall, and that's where contractors lose money if they quote by gut feel instead of a system.
Here's a repeatable way to price these jobs so you're covering your time, not just your materials.
Start With Patch Size and Count
Break every job into individual patches and price each one on a sliding scale, not a flat per-square-foot rate. A pinhole and a basketball-sized hole both need the same steps — cut back damaged board, set a patch or mesh, apply multiple coats of mud, sand between coats — but the time scales with size.
- Nail holes / small dings (under 2 inches): covered by your minimum charge, not priced separately.
- Small holes (2–6 inches, doorknob or thermostat-size): $75–$150 per patch.
- Medium holes (6 inches to 2 feet, often from a punched wall or removed fixture): $150–$300 per patch.
- Large holes or sections (2+ feet, water damage, or a full sheet replacement): priced by the square foot of new drywall plus hanging labor, usually $2–$4 per square foot before finishing.
If a customer has five small holes scattered through a house, don't just multiply your single-patch price by five. Bundle them — you're already on site with materials out, so the fourth and fifth patch cost you less marginal time than the first. Price the visit, not just the holes.
Why Small Patches Still Need a Minimum
A single nail-pop patch might take you 20 minutes of actual mudding time, but it never costs you only 20 minutes. You've still got to load the truck, drive out, walk the property, set up a drop cloth, mix compound for a job that barely uses any, and — if it needs texture or paint — come back a second time once it's dry. That overhead doesn't shrink just because the hole is small.
Texture Matching Is Its Own Line Item
Texture is where most drywall quotes go wrong. Matching orange peel, knockdown, or popcorn texture by hand takes a different skill and different tools than mudding the patch itself, and it often requires its own dry time before you can even start. Quote it separately so the customer understands what they're paying for:
- Smooth wall, no texture: usually folded into your base patch price.
- Orange peel or knockdown texture match: add $50–$150 per patch depending on how large an area you need to feather out to blend the repair.
- Popcorn ceiling texture match: add a premium — it's harder to blend invisibly, and many painters won't guarantee a perfect match on an older ceiling that's faded or been painted over multiple times.
Be upfront that a texture match is a best-effort blend, not an invisible repair, especially on sun-faded or heavily textured surfaces. Setting that expectation before you start avoids a dispute after the invoice goes out — the same way you'd document extra work before asking a customer to approve it on any job with gray areas.
Priming and Painting Get Their Own Lines Too
New compound and old paint absorb light differently, so an unprimed patch will flash through even a perfect color match. Always quote priming as a separate line — a quart of PVA primer and 15 minutes of roller time per patch — then paint as another line. If the customer wants you to paint corner-to-corner on the wall instead of just feathering the patch, that's a bigger job and a bigger number, not a freebie tucked into the repair price.
- Spot primer + spot paint (small, isolated patch): $50–$100 per patch.
- Full wall repaint to blend an unavoidable sheen difference: price by square footage like any interior painting job.
- Customer supplies their own paint: still charge for your time and materials to apply it — you're not discounting labor because they bought a gallon.
Ceilings, Multiple Coats, and Return Visits Cost More
Overhead work is slower and messier than wall patches — you're working against gravity, compound sags more, and you'll often need a third coat where a wall patch would need two. Add 25–50% to your base patch price for ceiling work.
Multi-coat repairs also force a scheduling reality customers don't always expect. Drywall mud needs to dry between coats, which usually means two or three separate visits spaced a day apart rather than one long session. Price each visit, not just the materials, since you're burning drive time and a slot on your schedule every time you come back. If you regularly run jobs like this, it's worth reading how to price jobs with multiple visits so the schedule and the invoice stay lined up.
Put a Real Minimum Charge on the Books
Drywall repair is the classic small job that eats your week if you don't protect your time. A $150 minimum isn't greedy — it's the floor that covers a truck roll, materials setup, and the inevitable follow-up visit for paint. If you haven't set a formal minimum for small jobs across your business, handyman minimum charges walks through how to land on a number that's fair to the customer and sustainable for you.
A Quick Worked Example
Three nail-pop holes, one 8-inch hole from a doorknob, and a ceiling water-stain patch, all in one house with knockdown texture:
- Minimum visit charge (covers the three nail pops): $175
- 8-inch wall patch: $150
- Ceiling patch (larger, overhead surcharge applied): $275
- Texture match, knockdown, two patches: $120
- Prime + paint, two patches: $140
- Total: $860, across one visit plus a return trip for final paint once texture dries.
Building This Into Your Estimates
Keeping these line items consistent from job to job is what separates a contractor who prices confidently from one who's guessing every time a new request comes in. If you want a fast starting number before you build the full written estimate, the free drywall repair estimate generator will rough out patch, texture, and paint pricing based on the details you give it — useful for a quick phone quote range or as a first draft you refine with your own numbers. Trusso keeps those same line items — patch size, texture, primer, paint, ceiling surcharge — saved in your price book, so every drywall estimate pulls from the same pricing instead of being rebuilt from scratch, and once it's approved it flows straight into the job schedule and invoice.
How much should I charge for a small drywall patch?
Most contractors charge $75–$150 for a single small patch (2–6 inches), but that's on top of a flat minimum visit charge of $150–$300 that covers drive time and setup regardless of hole size.
Should texture matching be included in the patch price or billed separately?
Bill it separately. Texture matching is a distinct skill and often needs its own dry time, so folding it into the base patch price makes it hard to explain why two similar-looking jobs cost differently.
Why does a ceiling patch cost more than a wall patch?
Ceiling work is slower because compound sags under gravity and usually needs an extra coat. Most contractors add 25–50% over their standard wall patch price for ceiling repairs.
Do I need to charge for a return visit if the mud needs to dry?
Yes. Multi-coat repairs typically require two or three separate visits spaced a day apart, and each one uses a slot on your schedule and a trip in your truck, so each visit should be priced, not absorbed into the original quote.
What's a fair minimum charge for a drywall repair job?
$150–$300 per visit is typical. It covers the fixed costs — loading materials, driving out, and setup — that don't shrink just because the hole itself is small.
Run your business the simple way
Try Trusso free for 14 days and send your first estimate in minutes.
Start 14-Day Free TrialKeep reading
What Is Construction Takeoff Software and Do Small Contractors Need It?
Takeoff software measures quantities—areas, lengths, counts—straight from plans so you can price a job without a tape measure and a calculator. Here's when a small contractor actually needs it.
Read articleComparisons7 Best Contractor Foreman Alternatives for General Contractors
Contractor Foreman covers a lot of ground but little of it goes deep. Here are 7 alternatives GCs switch to once they need real takeoff, sub bid-outs, or sharper scheduling.
Read article