The short answer
Price flatwork (driveways, patios, sidewalks) per square foot, and price house washing per surface or by linear foot of exterior wall, then adjust up for heavy soiling, second-story height, limited water access, and delicate surfaces like stucco or wood. Set a hard minimum — typically $150–$250 — so small jobs still cover your drive time and setup.
Most pressure washing companies lose money the same way: they quote by gut feel, forget the minimum, and treat every driveway and every house as the same job. A clean concrete slab and an oil-stained one with a 15-year-old sealer coat are not the same job, even if they're the same square footage. Below is the pricing logic and two worked examples you can copy.
Price flatwork by the square foot, not by the hour
For driveways, walkways, patios, pool decks, and other flat concrete or paver surfaces, square footage is the right base unit because it's what you're actually buying with your time: surface area to cover at a certain pressure and dwell time. National rates for straightforward concrete flatwork generally run $0.15–$0.35 per square foot. Where you land inside that range depends on four things.
The four adjustments that move your price
- Soiling level. Light dust and pollen wash off fast. Oil stains, rust, tire marks, mold, and years of built-up grime need pre-treatment, degreaser, and multiple passes — bump the per-square-foot rate 25–75% for heavy soiling.
- Height and access. Ground-level flatwork is your baseline. Second-story house washing, roofs, and gutters need ladders, extension wands, or soft-wash rigs — add 30–50% for anything above reach-from-the-ground.
- Water access. If the customer has an accessible spigot with decent pressure, you're fine. If you're running 150+ feet of hose, hauling your own water tank, or dealing with well-water pressure issues, that's added setup time — price it as a flat add-on, not a percentage, since the cost is mostly fixed regardless of job size.
- Surface type. Stamped concrete, pavers with sand joints, stucco, cedar siding, and painted wood all require lower pressure and more careful technique than plain broom-finish concrete. Slower work means a higher rate, often 20–40% above standard concrete pricing.
Worked example: 600 sq ft concrete driveway
Here's a standard residential driveway with moderate staining — a few oil spots, some tire marks, no major degreasing needed.
- Base rate: $0.22/sq ft × 600 sq ft = $132
- Soiling adjustment (moderate staining, +25%): +$33
- Water access: spigot on-site, no add-on
- Surface: standard broom-finish concrete, no adjustment
- Subtotal: $165
- Minimum check: above your $150 minimum, so the calculated price stands
- Quoted price: $165
That's a 25-minute setup, a 30-minute wash, and a few minutes of teardown for most single-operator rigs — a reasonable rate for the time, assuming your overhead and fuel are baked into that per-square-foot number already (see our guide to overhead costs if you haven't built that into your rate yet).
Worked example: 2,200 sq ft two-story house wash
House washing is priced less cleanly by square footage of exterior wall and more often by linear foot of perimeter or a flat per-surface rate, because siding type, trim detail, and window count all swing labor time more than raw area does. Here's a typical two-story vinyl-sided house.
- Base house wash rate: $350 flat for a soft-wash on a standard two-story, up to ~2,500 sq ft of exterior wall
- Height adjustment (second story, extension equipment required, +35%): +$122
- Soiling: moderate algae/mildew streaking on north-facing walls, already reflected in base soft-wash rate — no extra charge
- Water access: customer has an exterior spigot near the front, no add-on
- Add-on: gutter brightening requested separately, quoted as a line item at $85
- Subtotal: $472 + $85 = $557
- Quoted price: $555 (rounded for a clean number on the estimate)
Note the gutter brightening is a separate line, not folded into the house wash — itemizing versus lump-summing matters here because customers often want to drop add-ons to save money, and a single lump number makes that negotiation harder for both sides.
Set a minimum and actually enforce it
Every pressure washing business needs a stated minimum, the same way handyman minimum charges protect against money-losing small jobs. A single small patio or a front walkway might calculate out to $60–$90 by the square-foot math, but your drive time, fuel, equipment loading, and setup don't shrink just because the job is small. A $150–$250 minimum — adjusted for your market and drive radius — covers that fixed cost. Quote the minimum plainly on the estimate rather than padding the square footage number to hide it; customers respect a stated minimum far more than a rate that doesn't add up.
Write the adjustments down, not just the final number
The biggest source of pressure-washing disputes isn't the price — it's the customer not understanding why the price went from a phone quote to a different number once you saw the job. Note soiling condition, access issues, and surface type on the estimate itself, even as a short line like "heavy oil staining on garage apron, +$35." That line is the difference between a customer who nods along and one who argues the invoice after the work is done — and it's the same discipline covered in documenting extra work before asking for approval.
If you're quoting a job sight-unseen from a phone call or photos, lean soft on the number until you've confirmed soiling level and access in person — a soft estimate range beats a firm number you have to walk back. For a faster first pass on any pressure washing job, the free AI pressure washing estimate generator will build a square-footage-based price from a description and photos, which you can then adjust using the same four factors above. If pressure washing is one of several services you run, Trusso keeps that estimate tied to your own price book so the next quote for the same surface type is consistent instead of re-guessed — see how it fits a pressure washing business specifically.
What's a fair price per square foot for driveway pressure washing?
Most driveway washing falls between $0.15 and $0.35 per square foot for standard concrete with light to moderate staining. Heavily soiled, oil-stained, or stamped/paver surfaces run higher — often $0.35–$0.60 per square foot once you factor in degreaser, extra passes, and slower technique.
Should I charge by the square foot or by the hour for pressure washing?
Square footage for flatwork and a flat per-surface rate for house washing both track the actual cost driver — surface area and complexity — better than an hourly rate does. Hourly pricing works for odd jobs (fence restoration, deck prep) where area doesn't predict time well, but most driveway and house work should be quoted by area or surface, not by the clock.
How much should I charge for a two-story house wash versus one story?
Add 30–50% to your base house-wash rate for second-story work, since it requires extension wands or ladders and slower, more careful technique near windows and trim. A single-story ranch and a two-story colonial of similar square footage can easily be $100–$150 apart for that reason alone.
What should my minimum charge be for a small pressure washing job?
Most solo and small-crew pressure washing businesses set a minimum between $150 and $250 to cover drive time, equipment loading, and setup regardless of job size. Adjust up if your service area has a wide driving radius or down slightly in a dense suburban market where stops are close together.
How do I price pressure washing for a customer I can't visit in person?
Ask for clear photos of the surface, note the soiling level and any visible staining, and quote a range rather than a firm number until you've confirmed access and condition on-site. A phone or photo estimate should always be labeled as a rough range, not a final price, to avoid a dispute when you arrive and the job looks different than described.
This pricing framework reflects published rate ranges and standard trade practice for residential pressure washing as of November 2026; always confirm current material, water, and fuel costs in your own market before finalizing rates.
Run your business the simple way
Try Trusso free for 14 days and send your first estimate in minutes.
Start 14-Day Free TrialKeep reading
What Is Construction Takeoff Software and Do Small Contractors Need It?
Takeoff software measures quantities—areas, lengths, counts—straight from plans so you can price a job without a tape measure and a calculator. Here's when a small contractor actually needs it.
Read articleComparisons7 Best Contractor Foreman Alternatives for General Contractors
Contractor Foreman covers a lot of ground but little of it goes deep. Here are 7 alternatives GCs switch to once they need real takeoff, sub bid-outs, or sharper scheduling.
Read article